The Barrier Fence is designed to work with 15mm scale games. This tutorial will show you how to assemble the fence sections.

Each section consists of 3 basic components.

8 x Rods (optional)

2 x Supports

1 x Base

Tools Needed:

Flush Cutters

Acrylic Glue (We recommend Pro-Weld)

Super glue or epoxy will work as well but can cause clouding. This is easily covered up by painting the fence.

Step 1:

Thread the rods into the two upright pieces. Keeping them flat on the table will help positioning the rods easier.

Step 2:

Reposition one upright to the edge of the rods and glue it in place. Let this dry completely before moving on.

Now you can glue the other side in place. Some of the rods might over hang a small amount. The extra bits can be easily snipped off with a pair of flush cutters.

Step 3:

To add the base you need to make sure the upright is against the inside edge of the slot. This allows the next section in the row to be clipped into place. It is important to be consistent with the side that you attach the base so that all the sections can clip together. Glue the upright in place and your ready to paint.

Step 4:

Acrylic needs to be primed with a good plastic primer before painting. Once it is primed you can use metallic paint to give the appearance of metal rods.