We have struggled with our telescoping rod supplier for years now. We are very happy to have replaced them. What does this mean for you? Well better telescoping rods!

All the telescoping rods have been rolled into one item in the store and some changes have been made to the regular rods. They now have 7 segments and telescope from 5" to 25". We have had lots of requests for rods with more segments and are very happy with these new rods.  We are also adding two new types of rods.

Telescoping with Gimbal (Flat) - $3.99

Telescoping with Gimbal (Screw) -$4.99

The Gimbol rods have a mechanical joint that is stronger then the ball magnet and allow you to get the cinematic positioning benefits for larger and heavier aircraft. The screw type gives a solid mechanical connection that will hold up just about anything. Even die cast aircraft.

We also have a few new base options. First up is the Etched Round Bases. These bases have 30 degree firing arcs etched onto them. They should work great for Full Thrust and other games that use clock face movement.

Prices:

30mm Etch Round Base - $1.39

40mm Etch Round Base - $1.64

50mm Etch Round Base - $1.69

60mm Etch Round Base - $1.74

We have also added some new options for oval bases. The small ovals are designed for long thin models like jet bikes and the large oval bases are perfect for larger flying models.

Small Oval (75mm by 25mm) - $1.39

Medium Oval (100mm by 60mm) - $1.99

Large Oval (120mm by 90mm) - $3.99

US Shipping will be $8.00.

Unfortuently, we where not able to get International shipping down so it will remain $39.95.  We will continue to work on lowering the cost but at this point it doesn't look like we will be able to.

80" by 60" mats - $79.99

60" by 50" mats - $69.99

We incorperate the overlays into the printed images so they are uniform and will not fade over time. This pic shows you what the Blue Nebula pattern looks like with the overlay.

28mm Shopping Mall:

This set of buildings is designed to work together to make the staple of modern city terrain, The Shopping Mall! The standard and extended roof buildings are designed to stagger alternatively. Two extended roofs cannot be placed next to each other. The corner building works with either style to give you an inward 90 degree turn. Great for making L-Shaped or U-Shaped Malls. These stores can also be used as stand along small stores.

Prices: Standard Store - $16.99

           Extended Roof Store - $17.99

           Corner Store - $24.99

28mm Convenience Store

Where better to survive the Zombie apocalypse then a corner convenience store! Lots of food and supplies. Plenty of gas to make cocktails.

Price: $29.99

28mm Gas Station Island

Need to add a little something to your convenience store? Why not a pump island. This island comes with 4 pumps in 2 rows and should make a great addition to any table.

Price: $24.99

28mm Fast Food Restaurant

Another great hide out for the end of the world! This MASSIVE building is the largest we have made to date. It was so big we decided to include an etched floor plan inside. Better check the bathrooms before you settle in... The slopped roof is design to be easily removed for access to the interior. It is 400mm by 280mm by 110mm! A great center piece for your next game.

Price: $59.99

Assembly videos are in the works and will be posted soon. Links will be provided in the product descriptions as they are uploaded.

Simply press the plunger to reveal the steel rod inside. Pickup the magnet and move it into place. Once you release the plunger the steel rod retracts into the brass casing and lets go of the magnet. You don't even have to wait for the glue to try! Great for epoxy users.

The tool is designed to work with large and small magnets. All the way down to 1/8"! You can use if for even smaller magnets but you'll have to wait for the glue to dry or else they will be retracted into the tool with the steel rod.

Magnet Applicator Tool

Price: $7.99

We also have a video of the tool in action.

The new mats feature a thicker material. They are made from thick fleece which is comparable to felt without all the pesky fraying. They also lack the gloss look that most vinyl mats have. The synthetic fibers take inks a lot better then the heavy cotton.  The result is absolutely stunning. Rich vivid colors and deep blacks gives our old patterns new life and opens the door for even more patterns to be developed in the future.  Here is a side by side of the two versions.

The new version is machine washable. This was not possible with the old one because they ran the risk of fading. Now you can't be tossing these in the wash with your next load of laundry but they can be cleaned if something tragic happens like a spilled drink.

You'd think that all these great features would come at a cost. However, we are excited to be able to offer these mats at a much lower price then our previous version. 60" by 50" mats will run $69.99. However, this price doesn't come without some restrictions. In order to keep the cost low, we have decided to have the printer ship directly to our customers. This puts a few restrictions on us. The mats can no longer be mixed with general orders from our store. We converted them to buy it now buttons.

To celebrate the return of our Fabric Mats, we have decided to offer free shipping to all our US based customers. Unfortunately, Our international customers will see an increase in shipping costs. Currently we are forced to use UPS for shipping and that will cost $39.95 for all international orders.

We are working on a major store upgrade and integrating our system with the new printers. This will allow us to reduce the international shipping cost and release new sizes. We have plans for 80" x 60" and 40" by 30". This will take some time so we decided to move forward with the 60" by 50" mats.

Feel free to email us if you have any questions or issues with the new buttons!

First up is some 15mm scifi dwellings. These represent small buildings or frontier colony homes.

Medium Habitat (104mm x 104mm x 33mm)

Price: $14.99

Small Habitat (130mm x 60mm x 33mm)

Price: $11.99

We also have a new skyscraper for those of you playing 10mm games like Dropzone Commander and Heavy Gear.

10mm Half Moon Tower (120mm x 63mm x 300mm)

Price: $24.99

We have also expanded the scales available for the Quonset huts. It is now available in 10mm, 15mm, and 28mm.

Quonset Hut Kits

Price: 10mm - $5.99

          15mm - $7.99

          28mm - $11.99

We have also added new color options for the templates. The Movement, Firing, and Range templates are now available in fluorescent green and transparent red.

Prices:

Large Starfighter Base - $3.99

Shuttle Base - $1.99

The first in this series is a 15mm Quonset Hut. These buildings where an essential part of any WWII allied base and would make a great addition to any Flames of War table. The kit comes unassembled and unpainted.

Price: $7.99

We tossed together a quick assembly tutorial.Check out the video here.

We currently have 3 sets of door, windows, and vents available. We also have three styles of vehicle sized doors. They are available in 28mm and 15mm. The vehicle doors work great in different scales as well. The 15mm versions make nice wide doors in 28mm and the 28mm ones are large enough to work as massive hanger doors for 15mm.

Each set contains several pieces help together by a sprue frame that is easy to remove and clean. Prices range from $1.99- $3.99 for 15mm and $3.99 to $4.99 for 28mm.

Here are a few samples. Check out the rest here.

Starfighter Movement Template Set

Price: $19.99

Starfighter Range Ruler

Price $7.99

These should make great additions to your X-wing games. Don't forget about our other x-wing compatible items.

Starfighter Firing Template

Omni-Stand Starfighter Base (mounts and rods sold seperatly.)